Infinity
01-29-2006, 01:55 PM
Well for some reason I can't get my video resolution to work correctly for certain games. It works ok for Counterstrike, but I just got WoW and the screen is weird. No color problem or anything like that but it looks like it switches to 640x480 resolution and is stretched over to the bottom right so I can't see some of left or bottom of the game screen. It does this for diablo 2, gunbound, and gunz also; I dont understand what could be wrong.
I have a Radeon 7200 and i'm not sure what to do. My screen resolution is 1280x1024 and I have a TV monitor. Maybe that has something to do with it, but im not sure. Although, maybe my card does not support Dx 9.0?
I then ran my 3d tests from dxdiag all were good except 9. It seemed like 9 was off to the side like it everything was ingame.
In the event if it is my card, what would be the CHEAPEST dx9.0 supported card better than the 7200?
SPECS:
------------------
System Information
------------------
Time of this report: 12/4/2005, 00:07:47
Machine name: HOME2
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)
Language: English (Regional Setting: English)
System Manufacturer: To Be Filled By O.E.M.
System Model: To Be Filled By O.E.M.
BIOS: Rev 2.00
Processor: AMD Athlon(tm) 64 Processor 3400+, MMX, 3DNow, ~2.4GHz
Memory: 510MB RAM
Page File: 276MB used, 967MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode
---------------
Display Devices
---------------
Card name: RADEON 7200 SERIES
Manufacturer: ATI Technologies Inc.
Chip type: RADEON 7200 Series AGP (0x5144)
DAC type: Internal DAC(350MHz)
Device Key: Enum\PCI\VEN_1002&DEV_5144&SUBSYS_001A1002&REV_00
Display Memory: 64.0 MB
Current Mode: 1280 x 1024 (16 bit) (75Hz)
Monitor: ViewSonic P815
Monitor Max Res: 1800,1440
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6571 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 8/30/2005 20:42:53, 238592 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 8/30/2005 20:42:35, 1333760 bytes
Device Identifier: {D7B71EE2-1204-11CF-196A-1020A1C2CB35}
Vendor ID: 0x1002
Device ID: 0x5144
SubSys ID: 0x001A1002
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_D
Deinterlace Caps: {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=DeinterlaceTech_BOBLineReplicate
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=DeinterlaceTech_BOBVerticalStretch
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: All tests were successful
D3D7 Test Result: All tests were successful
D3D8 Test Result: All tests were successful
D3D9 Test Result: All tests were successful
Please help
Thanks in advance.
PS.
All the drivers are updated.
I have a Radeon 7200 and i'm not sure what to do. My screen resolution is 1280x1024 and I have a TV monitor. Maybe that has something to do with it, but im not sure. Although, maybe my card does not support Dx 9.0?
I then ran my 3d tests from dxdiag all were good except 9. It seemed like 9 was off to the side like it everything was ingame.
In the event if it is my card, what would be the CHEAPEST dx9.0 supported card better than the 7200?
SPECS:
------------------
System Information
------------------
Time of this report: 12/4/2005, 00:07:47
Machine name: HOME2
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)
Language: English (Regional Setting: English)
System Manufacturer: To Be Filled By O.E.M.
System Model: To Be Filled By O.E.M.
BIOS: Rev 2.00
Processor: AMD Athlon(tm) 64 Processor 3400+, MMX, 3DNow, ~2.4GHz
Memory: 510MB RAM
Page File: 276MB used, 967MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode
---------------
Display Devices
---------------
Card name: RADEON 7200 SERIES
Manufacturer: ATI Technologies Inc.
Chip type: RADEON 7200 Series AGP (0x5144)
DAC type: Internal DAC(350MHz)
Device Key: Enum\PCI\VEN_1002&DEV_5144&SUBSYS_001A1002&REV_00
Display Memory: 64.0 MB
Current Mode: 1280 x 1024 (16 bit) (75Hz)
Monitor: ViewSonic P815
Monitor Max Res: 1800,1440
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6571 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 8/30/2005 20:42:53, 238592 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 8/30/2005 20:42:35, 1333760 bytes
Device Identifier: {D7B71EE2-1204-11CF-196A-1020A1C2CB35}
Vendor ID: 0x1002
Device ID: 0x5144
SubSys ID: 0x001A1002
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_D
Deinterlace Caps: {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=DeinterlaceTech_BOBLineReplicate
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=DeinterlaceTech_BOBVerticalStretch
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: All tests were successful
D3D7 Test Result: All tests were successful
D3D8 Test Result: All tests were successful
D3D9 Test Result: All tests were successful
Please help
Thanks in advance.
PS.
All the drivers are updated.