JAGeAkurei
05-09-2006, 02:24 PM
Ok last week the cable guy came by to burry a new line they had put in at my place several months back. Ever since my connection has been acting very funny. I will call the company eventually as talking to them is like driving nails into my ears listening to their stupidity.
Here's the problem I think they caused, any solutions or ideas would be very appreciated
Running a Linksys 2.4 wireless G(the one that has a ton of hardline ports and wifi)
On this router, which is being used as a Gateway, there are three computers. I'm going to call them Master/Laptop/Slave for future purposes.
Master is hardlined directly to the router & is usually cloned via the router to spoof Master's mac address to the ISP. Usually assigned the standard 192.168.1.101 on the dhcp table. (And this is vital as if it is anything but that the entire online system fails)
Laptop is hardlined directly to the router, and is cloned to show up as Master as well MAC wise, but is assigned 1.102 this can be assigned any available dhcp and still function properly.
Slave is running off the wifi side of the router in a different room. And is usually assigned 1.103, and like the laptop it doesn't matter what dhcp is assigned.
Now normally I could turn the systems off in any order and it would remember these dhcp tables. Since last week if I don't turn off Master last, or boot Master first it re-assignes the DHCP table which then borks the entire isp.(And usually causes an auto-release of my gateway/dns/real ip.)
Working example:
Master 192.168.1.101
Laptop 192.168.1.102
Slav 192.168.1.103
What's been happening since last week
Laptop 192.168.1.101
Slav 192.168.1.102
Master 192.168.1.103
Sometimes even (which shouldn't even be possible lolz)
Laptop 192.168.1.102
Slav 192.168.1.103
Master 192.168.1.104
1. Any thoughts on a means of getting it back to the way it was, so that the dhcp table is static once I set it, regardless of boot order.
2. Should I just call the isp and threaten them with impending digital and physical doom via viri out the ass/katana+shotgun.
3. Is it possible they put a box on my node to track my usage which is giving me the odd 102/103/104? I have tracked some random stuff and do use more bandwidth than my entire neighborhood :confused:
Either way any help thoughts would be appreciated, clearly I can get it to work, but jumping through 15 hoops every morning is getting annoying.
Here's the problem I think they caused, any solutions or ideas would be very appreciated
Running a Linksys 2.4 wireless G(the one that has a ton of hardline ports and wifi)
On this router, which is being used as a Gateway, there are three computers. I'm going to call them Master/Laptop/Slave for future purposes.
Master is hardlined directly to the router & is usually cloned via the router to spoof Master's mac address to the ISP. Usually assigned the standard 192.168.1.101 on the dhcp table. (And this is vital as if it is anything but that the entire online system fails)
Laptop is hardlined directly to the router, and is cloned to show up as Master as well MAC wise, but is assigned 1.102 this can be assigned any available dhcp and still function properly.
Slave is running off the wifi side of the router in a different room. And is usually assigned 1.103, and like the laptop it doesn't matter what dhcp is assigned.
Now normally I could turn the systems off in any order and it would remember these dhcp tables. Since last week if I don't turn off Master last, or boot Master first it re-assignes the DHCP table which then borks the entire isp.(And usually causes an auto-release of my gateway/dns/real ip.)
Working example:
Master 192.168.1.101
Laptop 192.168.1.102
Slav 192.168.1.103
What's been happening since last week
Laptop 192.168.1.101
Slav 192.168.1.102
Master 192.168.1.103
Sometimes even (which shouldn't even be possible lolz)
Laptop 192.168.1.102
Slav 192.168.1.103
Master 192.168.1.104
1. Any thoughts on a means of getting it back to the way it was, so that the dhcp table is static once I set it, regardless of boot order.
2. Should I just call the isp and threaten them with impending digital and physical doom via viri out the ass/katana+shotgun.
3. Is it possible they put a box on my node to track my usage which is giving me the odd 102/103/104? I have tracked some random stuff and do use more bandwidth than my entire neighborhood :confused:
Either way any help thoughts would be appreciated, clearly I can get it to work, but jumping through 15 hoops every morning is getting annoying.